EL Wire, also known as electroluminescent wire is a thin phosphor coated wire in a tube which lights up when 120VAC is applied to it. EL Wires give off a neon type of glow which looks amazing in any environments! EL Wires are also extremely flexible, where it can be shaped to your liking. This EL Wire has a length of 2M.
El Wire High Brightness And Low Power Consumption: 100% new. Length of wire: 5 m, wire diameter: 2.3 mm. 2 * AA batteries may shine more than 10 hours.
El Wire 3 Modes: Fixed, fast flashing and slow blinking - simply press the driver button to change modes.
El Wire Use: Fence and tree, Christmas lights, flower glow, flash garments, wall and roof, outdoor garden lighting, neon advertising, car and bar lighting. Great DIY for car, parties, camping, Halloween bar decor and Christmas Cosplay dress decoration and so on. Brighten up your life and have fun!
El Wire Properties: Can be attached to the surface with tape, pen, glue, hack, etc. This electroluminescent wire is flexible and can be easily bent into any shape. But you must seal the new end. EL wire is a fine phosphor sheathed copper wire that shines 360 degrees. Use it where you can imagine!
El Wire Safe And Environmentally Friendly: This EL wire is a low-frequency, non-toxic material with low heat dissipation, low energy consumption, durable and waterproof lighting material. It can offer a 360 degree illumination.
This portable EL wire kits has been created by Electroluminescence Wire craft. EL Wire is a kind of Non-Toxic, less heat release, very durable and water resistant lighting material.
One color included, 5 metres each color.
One battery pack driver for each color.
Can offer 360 degrees of illumination throughout its entire length, Easy to install, Can be bent into any shape and cut into any length.
Each driver is capable of driving a maximum of 5 metres of EL Wire at any time.
Flexible, Energy saving, Less power drain than LEDs.
Great for parties Halloween costume, Christmas decoration, car, cyclist's bike, camping bar.
Item Height: 1ft
Item Length: 5m
Item Type: Interior Mouldings
Item Width: 1cm
Diameter of luminous band: 2.3mm, stitching edge 6mm
Input voltage: DC 12V
Working voltage: 50-120V; Best working voltage: 110V.
Working frequency: 800MHZ-1200HZ; best frequency: 1000Hz
Electrostatic capacity: 6.5nf/m (20°C RH <80%).
Illumination: 200cd/m2 (110V 1000HZ).
Power consumption: 43mW/M (110V 1000HZ).
Life: 6000-7000 hours (100V, 1KHz)
Working temperature: -20°C~+70°C.
Relative humidity: RH <90%.
Storage temperature: -10°C~+40°C
Storage relative humidity: RH <65%.
3 light modes: Continuous On / Strobe / Blink and Off.
Powered by: 2 x AA batteries (not included).
There is no need to paste adhesive, just insert the sewable label directly into the gap of the door or instrument panel, and the panel seam. Don't worry about leaving traces of glue. It is also easy to sew the label directly on the surface.
1. Clothing decoration-sportswear, T-shirts and hats 2. Vehicle decoration-car, bicycle, boat decoration 3. House decoration-for KTV, bar stage, windows, 4. Advertising board-make different logos and different shapes 5. Holiday decoration-Christmas tree
Package included: 5M/16.4ft EL wirex1 1 x car cigarette lighter connection / USB drive